| Material | Print Technique | Outdoor | Water Resistance | Thickness | Adhesive | Liner | Temperature Rating | Application temperature | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Vinyl with Removable Adhesive
 Outdoor vinyl placards have an adhesive that stays put, yet can be removed cleanly
should you need another placard message. Apply the placard on a clean, dry surface.
For best results, you must apply the placard at temperatures between 40°F and
80°F. The removability of the vinyl placards is compromised if your placard
remains on the vehicle for over a year.
|
Flexo |
|
|
4.5 mil |  |
60# |
-40°F to 200°F |
40°F | |||||||||||||||||||||
|
Package: 25 Placards/Pack
|
|||||||||||||||||||||||||||||
|
Heavy-Weight Coated Tagboard
 Placard is made from a 16 point board that has a 215# basis weight. Tagboard coating
is water resistant. Use with one of our placard holders.
|
Flexo |  |
|
16.0 mil |
-40°F to 200°F |
||||||||||||||||||||||||
|
Package: 25 Placards/Pack
|
|||||||||||||||||||||||||||||
